Metal-Cutting Circular Saw Blades: The Complete Guide to Choosing and Using the Right Blade
The abrasive wheel glowed orange against the angle iron. Sparks showered the floor. But the cut hadn’t deepened in two minutes. I…
Alex Jean
I’m Alex Jean, Founder of MyDiamondBlade. Before starting this platform, I gained hands-on experience using cutting tools in real working environments, cutting concrete, tile and stone. Through firsthand use, I learned that most cutting problems come from choosing the wrong blade for the job. Issues like overheating, uneven cuts and rapid blade wear pushed me to deeply understand blade design, material compatibility and correct usage. MyDiamondBlade was created to turn real-world experience into clear, honest guidance helping users avoid costly mistakes and choose the right blade with confidence. Alex Jean – Founder & Lead Guide
How to Cut Porcelain Tile Without Chipping: A Pro’s Guide
The 600mm porcelain plank I’d just run through the wet saw had a 2mm chip right along the glazed edge, visible from…
Diamond Core Drilling: The Complete Field Guide to Clean Holes in Any Masonry
The bit skated across the brick, leaving a scar instead of a hole. I was dry drilling a 2-inch vent hole with…
Diamond Blade Types: A Pro’s Guide to Cutting Concrete and Grinding
I was halfway through a 4-inch slab when the blade started skating. That’s when I finally ditched the cheap continuous rim for…
The Concrete Cutter’s Guide to Diamond Blades: From Segmented to Turbo
I was standing over a glazed blade, the saw screaming and the cut not moving, when I finally did the math on…